Gutter companies in Spokane, WA

Spokane homeowners deal with heavy ponderosa pine needle drop, freeze-thaw winters, and spring snowmelt that can overwhelm an undersized or clogged gutter system. Homeowner Henry connects you with up to three local pros who will show up, quote honestly in writing, and finish the job — no bidding wars, no spam.

Skip the 10 phone calls.

Tell Henry about your project once and get up to 3 written estimates from local Spokane gutter companies.

Get 3 free estimates

Top 10 gutter companies in Spokane, WA

The 10 Spokane gutter companies with the most Google reviews.

  1. 1

    Leafguard Gutter Protection

    4.8254 reviews11407 E Montgomery Dr, Spokane Valley, WA 99206, USA

    View on Google
  2. 2

    Bob's Seamless Rain Gutters

    4.9238 reviews2003 E Boone Ave, Spokane, WA 99202, USA

    View on Google
  3. 3

    Proflow Exteriors

    4.9118 reviews8001 E Marietta Ave, Spokane, WA 99212, USA

    View on Google
  4. 4

    Perrenoud Roofing Inc.

    4.4114 reviews7710 N Freya St, Spokane, WA 99217, USA

    View on Google
  5. 5

    Spokane Rain Gutter Inc.

    4.7111 reviews8710 E Sprague Ave, Spokane, WA 99212, USA

    View on Google
  6. 6

    509 Gutters LLC

    5.0100 reviews5822 N Lindeke St, Spokane, WA 99205, USA

    View on Google
  7. 7

    The Brothers That Just Do Gutters

    4.993 reviews15215 E Marietta Ave Unit A103, Spokane Valley, WA 99216, USA

    View on Google
  8. 8

    Rainman Seamless Rain Gutters

    4.791 reviews205 E Ermina Ave, Spokane, WA 99207, USA

    View on Google
  9. 9

    Raindrop Raingutters

    5.073 reviews3516B N Market St, Spokane, WA 99207, USA

    View on Google
  10. 10

    Cascade Rain Gutters, Inc.

    4.960 reviews3345 E Trent Ave, Spokane, WA 99202, USA

    View on Google

Ratings and reviews powered by Google

Skip the 10 phone calls.

Tell Henry about your project once and get up to 3 written estimates from local Spokane gutter companies.

Get 3 free estimates

The Henry Standard

Every gutter installer in our network agrees to three things.

Show up

Call back. Keep appointments. And if something changes, communicate it.

Quote honestly

Price per linear foot, material and downspout count in writing — no vague lump sum.

Finish the work

Install, seal and hang every run, then clean up before calling it finished.

Nothing revolutionary. Just the way we believe doing business should still be done.

How Henry matches you with Spokane gutter installers

  1. Step 1

    Tell Henry about your gutters

    Your ZIP, roughly how much linear footage, and what's going on — clogging, sagging, leaking, or none at all yet. Two minutes, four questions.

  2. Step 2

    Only three pros get it

    Only three Henry Standard gutter installers in your Spokane-area ZIP get your request — each has agreed to show up, quote honestly in writing, and finish the work.

  3. Step 3

    Compare up to three quotes

    You hear from three gutter installers at most — never a list of twenty — and every estimate comes in writing. You pick, or pick nobody.

What gutter installation costs in Spokane

Seamless aluminum gutters, 5" K-style$7–$11 per linear foot (estimate)
Seamless aluminum gutters, 6" K-style$9–$14 per linear foot (estimate)
Half-round aluminum or steel gutters$12–$20 per linear foot (estimate)
Copper gutters$25–$40 per linear foot (estimate)
Sectional vinyl gutters$4–$7 per linear foot (estimate)
Gutter guards (screen or micro-mesh)$6–$12 per linear foot (estimate)
Downspout, standard 2x3" or 3x4"$8–$14 per linear foot (estimate)
Heat cable / de-icing cable install$3–$7 per linear foot, plus a dedicated outlet if needed (estimate)
Fascia or soffit repair (ahead of install)$10–$25 per linear foot (estimate)

Ranges are general estimates gathered from homeowner-reported quotes in the Spokane area, not an offer or a quote for your project.

When to schedule gutter installation in Spokane

Spokane's gutter season is shaped by two stresses: heavy winter snow load on the roof edge and a fast spring melt that can send a wall of water and slush off the roof at once. Ponderosa pine and other conifer needles common in neighborhoods like South Hill and the North Side clog screens and downspouts faster than broadleaf debris, so many local pros recommend a fall and a pre-winter cleaning rather than a single annual visit.

Permits and HOA rules

Gutter replacement on an existing single-family home is typically routine maintenance and does not trigger a separate City of Spokane building permit, but any project that changes how stormwater leaves the site — such as rerouting downspouts into a new drainage system, adding impervious surface, or tying into site grading — falls under the City's stormwater and runoff infiltration standards in Spokane Municipal Code Chapter 17D.060, administered by the City's Development Services/Engineering Services staff. If your project is part of a larger remodel or new construction that already requires a drainage plan, gutter and downspout discharge points should be shown on it. Always confirm current requirements and any fees directly with City of Spokane Development Services before work begins — this page does not state fees because the City does not publish a flat gutter-specific fee.

Licensing and insurance in Washington

Washington does not issue a separate statewide license specifically for gutter installers, but any business performing gutter work for pay must be registered as a specialty or general construction contractor with the Washington State Department of Labor & Industries (L&I), carry a surety bond, and maintain general liability insurance. Before hiring, use L&I's free Verify a Contractor, Tradesperson or Business tool to confirm active registration status, bond and insurance standing, and any safety or lawsuit history.

What drives gutter costs in Spokane

Most Spokane homes use seamless 5" K-style aluminum gutters as the standard choice, with 6" sizing increasingly common on steep-pitched roofs or homes with large roof planes that shed a lot of water fast during spring melt.

Material choice moves the price more than almost any other factor: vinyl sectional systems are the cheapest option but perform poorly under heavy snow and ice loads common east of the Cascades, while copper and half-round styles cost far more but are often chosen for historic homes in districts like Browne's Addition where appearance matters.

Downspouts, gutter guards, and fascia or soffit repair should always be quoted as separate line items rather than folded into a single number — a written, itemized quote makes it easy to compare what each of your three matched pros is actually proposing.

Snow load and ice dams

Spokane's winters bring sustained freezing temperatures and multiple snow events per season, which puts real weight on gutters and creates conditions for ice dams where melting snow refreezes at the roof edge and backs water up under shingles.

Heat cable (de-icing cable) run along the eaves and inside the gutter channel is a common local add-on, especially on north-facing roof sections or homes with poor attic ventilation that encourage uneven snowmelt.

Gutters and hangers rated for heavier loads, spaced more tightly than a mild-climate install would require, help the system survive repeated freeze-thaw cycles without pulling away from the fascia.

Spring snowmelt and drainage away from the foundation

When Spokane's snowpack melts quickly in late winter and early spring, downspouts need to move a large volume of water away from the foundation in a short window, which is why downspout placement and extensions matter as much as the gutter size itself.

Homes on sloped lots in areas like South Hill benefit from downspouts and splash blocks or buried drain lines directed toward the street or a drainage swale rather than pooling near a basement or crawlspace wall.

If your project involves changing how water leaves your lot — for example adding a new underground downspout line that discharges somewhere new — that falls under the City's stormwater runoff and infiltration control rules, so it's worth asking your installer whether the scope triggers that review.

Ponderosa pine needles and leaf load

Ponderosa pine is common across Spokane's older neighborhoods, and its thin needles pack into gutter screens and downspout openings more tightly than broad leaves, which can cause overflow even when a gutter looks mostly clear from the ground.

Micro-mesh or reverse-curve guards tend to handle needle debris better than wide screen guards, though no guard eliminates the need for periodic cleaning in a heavily treed yard.

Homeowners near parks and mature tree canopy, such as parts of Comstock and Manito, often schedule an extra cleaning in late fall after needle drop and again before spring melt.

Permits and when the City of Spokane gets involved

Straightforward like-for-like gutter replacement generally does not require a standalone building permit from the City of Spokane, since it's treated as exterior maintenance rather than new construction.

Where the City does have formal standards is stormwater: Spokane Municipal Code Chapter 17D.060 governs runoff and infiltration controls for land-disturbing activity and drainage plans, and City of Spokane Development Services and Engineering Services administer those requirements for larger projects.

If your gutter project is bundled into a roof replacement, addition, or new impervious surface, ask your contractor whether the overall project needs a permit or drainage plan review — the gutter work itself usually isn't the trigger, but the larger project might be.

Historic districts: Browne's Addition and beyond

Browne's Addition was designated a local historic district in 2019, and exterior work on contributing properties — including visible changes like gutter style, color, and material — can require a Certificate of Appropriateness (COA) from the Spokane Historic Landmarks Commission under the Browne's Addition Historic District Design Standards and Guidelines.

The Spokane Historic Preservation Office notes that normal maintenance or repair that doesn't change the exterior appearance of a building generally does not require design review, but replacing gutters with a different style, size, or material on a designated historic property may count as a reviewable alteration.

If your home is in Browne's Addition, the Cannon Streetcar Suburb Historic District, or individually listed on the Spokane Register of Historic Places, check with the Spokane Historic Preservation Office before changing gutter style or material so your installer can match the right profile and color.

Hiring and verifying a Spokane gutter contractor

Washington requires every construction contractor, including gutter specialty contractors, to register with the Department of Labor & Industries, hold a surety bond, and carry general liability insurance before performing paid work.

Before signing anything, use L&I's free online Verify tool to confirm a contractor's registration is active, check for unpaid bond claims or safety violations, and see whether a lawsuit has been filed against their bond.

A healthy roof edge affects gutter performance, so it's worth a quick visual check that fascia boards aren't rotted and soffits are intact before installation — if they're damaged, that repair should be quoted as its own line item, not folded into the gutter price.

Homeowner Henry sends your request to up to three local pros who agree to show up, quote honestly in writing, and finish the work, so you can compare real numbers side by side instead of chasing down contractors one at a time.

Areas Henry covers

Browne's Addition · South Hill · Comstock · Manito · West Central · Indian Trail · Lincoln Heights · Spokane Valley border areas near Dishman

Common questions

Do I need a permit to replace my gutters in Spokane?

Routine gutter replacement generally does not require a standalone City of Spokane building permit, but projects that change stormwater discharge or drainage on the site can fall under the City's stormwater and runoff infiltration standards, so confirm with City of Spokane Development Services for anything beyond a simple swap.

Is gutter work regulated in Browne's Addition or other historic districts?

Yes — properties in the Browne's Addition local historic district and other Spokane Register-listed properties may need a Certificate of Appropriateness from the Spokane Historic Landmarks Commission for exterior changes, which can include gutter style, size, or material; routine repair with no appearance change is generally exempt.

What size gutters are best for Spokane roofs?

Many Spokane homes do fine with standard 5" seamless K-style aluminum gutters, but homes with larger or steeply pitched roof planes, or those that see heavy spring snowmelt, often move up to 6" gutters and larger downspouts to handle the volume.

Do I need heat cable on my gutters in Spokane?

Heat cable isn't required by code, but it's a common local add-on for roof sections prone to ice dams, especially north-facing eaves or areas with uneven attic insulation that cause repeated freeze-thaw cycling.

How do I check if a Spokane gutter contractor is properly licensed?

Use the Washington L&I Verify a Contractor, Tradesperson or Business tool to confirm the business has an active contractor registration, a valid bond, and current liability insurance before you sign a contract.

How often should gutters be cleaned in Spokane because of pine needles?

In neighborhoods with mature ponderosa pine and other conifers, many homeowners schedule a cleaning in late fall after needle drop and again before spring snowmelt, since needles clog screens faster than broadleaf debris.

Get Spokane gutter estimates in writing.

Two minutes now beats guessing at a lump-sum quote. Free, no obligation, never more than three installers.

Get My Free Gutter Quotes